PRODUCTS

VMC-850/855/1160/1270/1370/1380/1580/1890

The bed structure is strong andcan withstand the inertia generatedby high-speed movement.

Keywords:

Category:

Vertical High Speed Machining Center Series

Product Inquiries:

86-13912283865

Message

Structural characteristics

● The bed structure is strong andcan withstand the inertia generatedby high-speed movement.

● The X//Z triaxial adopts high-speed screw and roller line rail tomake the themal displacement lessand high precision.

● 36/48m adjustment displacement,can save 50% of non-processingtime.

● Heightening column design,reserving space for installation ofthe fourth and fifth axis.

● Three-axis guard protects screwrail to improve machine life.

Main technical parameters

Item	Unit	VMC-850	VMC-855	VMC-1160	VMC-1270	VMC-1370(Y-axis quadruple track)	VMC-1380	VMC-1680(Y-axis quadruple track)	VMC-1880
Work table
Table size	mm	1000×500	1000×500	1200×600	1300×600	1400×700	1400×700	1700×800	2000×900
Table T-slot		5-18×90	5-18×90	5-18×100	7-18×100	5-18×125	5-18×110	7-18×110	5-22×165
Maximum load of workbench	kg	500	500	800	1000	1200	1000	1500	1700
Processing range
Left and rightravel（X）	mm	800	800	1100	1200	1300	1300	1500	1800
Fore and aft travel（Y）	mm	500	550	600	700	700	800	800	900
Upand Down Travel（Z）	mm	500	550	600	600	700	700	700	700
Distance from spindle center to column guide rail	mm	550	600	650	700	785	820	850	960
Distance from spindle end face to worktable	mm	130-630	130-680	120-720	120-720	120-820	110-810	130-830	150-850
Spindle
Spindle tool holder		BT40	BT40	BT40	BT40	BT40/ BT50	BT40/ BT50	BT40/ BT50	BT50
Spindle speed ( standard )	rpm	10000/12000	8000/10000/12000	8000/10000/12000	10000	8000/10000/12000/6000	8000/6000	8000/6000	6000
Spindle motor power	kw	7.5/11	7.5/11	11/15	11/15	15/18.5	11/15	18.5/22	18.5/22
Three–axis feed drive
Three-axis cutting feed	mm/min	10000	10000	10000	10000	10000	10000	10000	10000
Three-axis fast moving speed	m/min	48/48/48	48/48/36	30/30/30	30/30/30	24/24/16	20/20/20	20/20/16	20/20/16
Guide rail form	Three wires/two wires and one hard		Three wires/two wires and one hard
X/Y/Z axis ball screw specification	mm	Φ40/Φ40/Φ40	Φ40/Φ40/Φ40	Φ40/Φ40/Φ40	Φ40/Φ40/Φ40	Φ50/Φ50/Φ50	Φ40/Φ40/Φ40	Φ55/Φ55/Φ55	Φ55/Φ55/Φ55
Tool magazine
Tool magazine form		Disk manipulator type		Disk manipulator type
Magazine capacity	PCS	24T	24T	24T	24T	24T	24T	24T	24T
Maximum tool diameter ( full tool/blank tool )	mm	Φ75/Φ150	Φ75/Φ150	Φ75/Φ150	Φ120/Φ200	Φ120/Φ200	Φ120/Φ200	Φ120/Φ200	Φ120/Φ200
Maximum tool length	mm	300	300	300	300	300	300	300	300
Maximum weight of cutter	kg	8	8	8	18	18	18	18	18
Tool change time ( tool to tool )	sec	2	2	2	3.5	3.5	3.5	3.5	3.5
Accuracy
X,Y,Z positioning accuracy	mm	0.008/300	0.008/300	0.009/300	0.008/300	0.009/300	0.008/300	0.009/300	0.008/300
X,Y,Z repeat positioning accuracy	mm	0.005/300	0.005/300	0.005/300	0.005/300	0.005/300	0.005/300	0.005/300	0.006/300
Other
Compressed airpressure	kg/cm2	≥6	≥6	≥6	≥6	≥6	≥6	≥6	≥6
Power capacity	KVA	25	25	30	35	35	35	40	40
Machine weight	kg	5000	5500	6800	8000	10000	9000	12000	15500
Machine size（L×W×H）	mm	2500×2400×2650	2500×2400×2650	3100×2600×2850	3400×2600×3000	3400×2750×3000	3600×3000×3400	4300×3000×3500	4300×3200×3350

说明页内容……